Forum: USBoot

hi,
old HP with pentium III 731mhz, 320GB RAM

I dont think this will fit here so I paste only the 4 errors here:


PCI\VEN_1106&DEV_059...0&REV_11\3&61AAA01&0&38 VIA PCI to ISA bridge ! (56%) ...install failed

(PCI\VEN_1106&DEV_0596&SUBSYS_00000000&REV_11\3&61AAA01&0&38|VIA PCI to ISA bridge|present|System|isapnp|VIA|~~~|PCI\VEN_1106&CC_060100,PCI\VEN_1106&CC_0601,PCI\VEN_1106,PCI\CC_060100,PCI\CC_0601|) ((0x20000003))

PCI\VEN_1106&DEV_069...0&REV_42\3&61AAA01&0&00 VIA CPU to PCI bridge ! (60%) ...install failed

(PCI\VEN_1106&DEV_0691&SUBSYS_00000000&REV_42\3&61AAA01&0&00|VIA CPU to PCI bridge|present|System|~~~|VIA|~~~|PCI\VEN_1106&CC_060000,PCI\VEN_1106&CC_0600,PCI\VEN_1106,PCI\CC_060000,PCI\CC_0600|) ((0x20000003))

PCI\VEN_1106&DEV_305...0&REV_20\3&61AAA01&0&3B VIA Power Management Controller ! (64%) ...install failed

(PCI\VEN_1106&DEV_3051&SUBSYS_00000000&REV_20\3&61AAA01&0&3B|VIA Power Management Controller|present|System|~~~|VIA|~~~|PCI\VEN_1106&CC_060000,PCI\VEN_1106&CC_0600,PCI\VEN_1106,PCI\CC_060000,PCI\CC_0600|) ((0x20000003))

PCI\VEN_1106&DEV_859...0&REV_00\3&61AAA01&0&08 VIA CPU to AGP Controller ! (68%) ...install failed

(PCI\VEN_1106&DEV_8598&SUBSYS_00000000&REV_00\3&61AAA01&0&08|VIA CPU to AGP Controller|present|System|pci|VIA|~~~|PCI\VEN_1106&CC_060400,PCI\VEN_1106&CC_0604,PCI\VEN_1106,PCI\CC_060400,PCI\CC_0604|) ((0x20000003))


why is this fail and how can I correct this?

I can boot in safe mode but only once the next time going to safe mode after the drive gaurd and arc guard screen I get a BLUE BSOD:

***STOP: 0x00000007b 9oxf88a1528, 0xc0000034, 0x000000000, 0x0000000


any suggestions?

thanks